Showing posts with label Physical chemistry. Show all posts
Showing posts with label Physical chemistry. Show all posts

Monday, June 5, 2023

Factors Affecting Boiling Point and Vapour Pressure of Liquid



Factors affecting Boiling Point and vapour pressure of Liquid


Boiling Point 

The boiling point is the temperature at which a liquid turns into a gas or the point where the vapor pressure of a liquid equals the atmospheric pressure. For example, Water has the chemical formula H2O and is an inorganic substance. It is a translucent, tasteless, odorless, and almost colorless chemical substance that is the primary ingredient of the hydrosphere of Earth and all known living creatures' fluids. At 1 atm (i.e., 101.325 kPa), the typical boiling point is 99.97 °C (211.9 °F). At a standard pressure of 100 kPa (1 bar), the IUPAC-recommended standardized boiling point of water is 99.61 °C (211.3 °F).

 The factors that affect boiling point include:

Factors:
1. Atmospheric pressure: 

The higher the atmospheric pressure, the higher the boiling point. This is because more pressure is required to keep the liquid in a liquid state at a higher temperature.

2. Intermolecular forces: 

The stronger the intermolecular forces of attraction between the molecules of a substance, the higher the boiling point. The reason is that more energy is required to overcome these forces and break the bonds between the molecules.

3. Molecular weight: 

Generally, the higher the molecular weight of a substance, the higher the boiling point. This is because more energy is required to overcome the stronger intermolecular forces between larger molecules.


4. Presence of impurities: 

The presence of impurities in a substance can lower its boiling point. This is because impurities disrupt the intermolecular forces between the molecules, making it easier to convert the liquid into a gas.

  • Factors Affecting Boiling Point and vapour pressure of Liquid
    Factors Affecting Boiling Point 

Vapour Pressure 

Vapor pressure is defined as the pressure exerted by the vapor of a substance in a closed system when it is in equilibrium with its liquid or solid phase at a particular temperature. In simpler terms, it is the measure of the tendency of molecules in a liquid to escape into the atmosphere as a gas or vapor. As an example, when water vapor molecules are gaseous, they exert pressure on the surrounding environment. Water has a vapor pressure of 23.8 mmHg at 298K. 


Factors:
There are several factors that affect vapor pressure, including:


1. Temperature: 

Vapor pressure increases with an increase in temperature. This is because at higher temperatures, more molecules have sufficient kinetic energy to escape from the liquid and become a vapor.

2. Intermolecular forces: 

The strength of intermolecular forces between molecules affects vapor pressure. Stronger forces lead to lower vapor pressure as molecules are more tightly held in the liquid phase.

3. Molecular weight: 

The higher the molecular weight of a substance, the lower the vapor pressure. This is because heavier molecules have weaker kinetic energy and are less likely to escape the liquid phase.

4. Surface area: 

An increase in surface area leads to an increase in vapor pressure. This is because more molecules are available to escape into the atmosphere, increasing the likelihood of vaporization.

5. Presence of other gases: 

The presence of other gases can affect vapor pressure. If the gas is less dense than air, it will tend to rise and decrease the pressure at the surface of the liquid, leading to an increase in vapor pressure.


  • Factors Affecting Boiling Point and vapour pressure of Liquid
    Factors Affecting Vapor Pressure of Liquid 

Example:
An example of the relationship between boiling point and vapor pressure is the difference between water and acetone. The boiling point of water is 100℃, while the boiling point of acetone is much lower at 56℃. This indicates that acetone has a much higher vapor pressure at room temperature than water.

This is because acetone molecules have weaker intermolecular forces than water molecules, meaning that more of them can escape into the atmosphere at a given temperature. As a result, acetone evaporates more quickly than water and has a higher vapor pressure.

In contrast, water has stronger intermolecular forces and a higher boiling point, which makes it less likely to evaporate at room temperature. This is why water is a liquid at room temperature, while acetone is a volatile liquid that easily evaporates.


Wednesday, May 31, 2023

Concept of Atom, Element, Molecule and Compound

 
Concept of Atom, Element, Molecule and Compound


The study of matter and its interactions with one another is the focus of the scientific field of chemistry. Anything with mass and space is considered to matter. It is composed of atoms, which are minuscule building blocks that come together to create molecules and compounds. In order to plan experiments, anticipate chemical reactions, and comprehend the characteristics of matter, it is essential to understand the fundamental notions of atom, element, molecule, and compound.

Matter:

Anything that has mass and takes up space is considered to be matter. It is the material that makes up the cosmos and it manifests in many shapes with distinct properties. The types of matter include:

1. Solid: A material that is solid has a specific form and volume. Solids are made up of densely packed particles that vibrate about their fixed locations.

2. Liquid: A condition of a substance known as liquid has a specified volume but no distinct form. Liquids' constituent particles can circulate around one another because they are less tightly packed than those of solids.

3. Gas: A condition of a substance known as gas lacks both a definite form and a specified volume. Gases are made up of free-moving particles that take up the full capacity of their container.


Concept of Atom, Element, Molecule and compound
Matter

Substance:

A substance is a category of matter that possesses unique physical and chemical qualities as well as a consistent makeup. Pure form of matter is known as substance. This indicates that a material has a unique set of properties that identify it and set it apart from other substances, even if it is composed of the same fundamental particles whose ratio of composition does not vary. Although substances can exist in several states of matter, including solid, liquid, and gas, and may change state and experience chemical reactions, they always retain their identity. Water, sodium chloride, copper, oxygen, and carbon dioxide are a few examples of substances.

Atom:

The fundamental building block of matter, an atom nonetheless has the chemical characteristics of an element. It is the tiniest elemental particle capable of taking part in a chemical process. A nucleus, protons, neutrons, and electrons make up an atom. The protons and neutrons that make up the atom's nucleus are located in its center, while the electrons that surround it are negatively charged particles. The mass number of an element is determined by the total number of protons and neutrons, whereas the atomic number of an element is determined by the number of protons in the nucleus.


Concept of Atom, Element, Molecule and compound
Element 

Element:

A pure material with only one kind of atom makes up an element. Because of the uniqueness of its atomic number, its atom's nucleus always has the same number of protons. The distinctive chemical symbol for each element, such as H for hydrogen, O for oxygen, or Na for sodium, is used to identify it. There are 118 known elements, 92 of which are found naturally while the rest are created artificially.

The fundamental components that make up all matter in the universe are known as elements. By using standard chemical processes, they cannot be broken down into simpler chemicals. The elements are arranged according to their atomic structure in a chart called the periodic table. Each element has a distinct symbol made up of one or two letters, and the atomic number of an element determines where it belongs in the periodic table. The 118 elements in the periodic table are categorized into groups and periods based on their related characteristics and electron configurations. Based on their chemical and physical characteristics, the elements in the periodic table are separated into three main groups: metals, nonmetals, and metalloids (or semimetals).

Molecule:

Two or more atoms linked together by chemical bonds make up a molecule. These chemical connections might be ionic, polar, or covalent. Ionic bonds are created when electrons are transferred from one atom to another, whereas covalent connections are created when electrons are shared across atoms. When atoms share their electrons inequitably, polar covalent connections are created. Both homonuclear and heteronuclear molecules are possible. A heteronuclear molecule combines atoms of several elements, whereas a homo-nuclear molecule has only atoms of the same element.

Concept of Atom, Element, Molecule and compound
Molecule 

Compound:

A compound is a pure material that is composed of two or more components that are chemically joined in a certain order. A compound's chemical formula identifies its constituent parts. For instance, water (H2O) is a substance made up of two hydrogens and one oxygen atom. While some compounds contain more than two components, others contain only two elements. Chemical processes that include the forming and breaking of chemical bonds are what create compounds.

Concept of Atom, Element, Molecule and compound
Compound 

In conclusion, the fundamental components of matter are the atom, element, molecule, and compound. The smallest component of an element that takes part in a chemical reaction is called its atoms. Pure compounds made up of only one kind of atom are called elements. When two or more atoms are bound together by chemical bonds, molecules are created. Pure substances known as compounds are created when two or more elements are chemically bonded together. Understanding the characteristics of these fundamental units enables us to plan experiments, anticipate chemical reactions, and comprehend and predict the characteristics of matter.


Sunday, January 29, 2023

History, Classification and Formation of Liquid Crystals

 History, Classification and Formation of Liquid Crystals


History, Classification and Formation of Liquid Crystals
History, Classification and Formation of Liquid Crystals

The word "crystal" originates from the Greek word krystallos, which is a synonym for ice and literally means "coldness drawn together."

Liquid crystals

Some substances don't melt into ordinary liquids right away; instead, they go through a stage that flows like a liquid yet resembles a solid in many ways. The material is a liquid crystal at this stage. It retains some of the crystalline solid's organized structure, which is the most prevalent kind of solid.

When substances are heated to their melting temperatures, the majority of them instantly transform from solids to liquids. When a substance in a crystalline solid reaches its melting point, all the forces that keep the substance's crystal structure are normally dismantled at once, allowing the substance's molecules to move around freely and pass by one another.

There are two or more steps to the melting process that occur at various temperatures for compounds that turn into liquid crystals. Some of the forces governing the structure of these substances are substantially stronger than others when they are solid.

History of Liquid crystals

In 1850 W. Heintz take stearin and heat it, he noticed two temperatures one at 52°C convert to cloudy liquid form and at 62°C stearin becomes clear liquid. The phase between solid and liquid form of stearin is called as liquid crystal or mesosphere.

While researching carrot cholesteryl benzoate in 1888, Austrian botanist Friedrich Reinitzer made the unintentional discovery of liquid crystals. When Reinitzer heated cholesteryl benzoate, he discovered that it had two melting points. It initially melted around 294°F (145°C) and changed into a hazy fluid. It altered once more at 353°F (179°C), but this time it became a transparent liquid. He also noticed that the substance reflected polarised light and had the ability to change the direction of polarization of light.





Classification of Liquid crystals

There are various LC phase types, and these can be identified by the way they look (such as textures). Because molecules in one region of the material, or "domain," are all orientated in the same direction, but in other regions, they are all oriented differently, the opposing textures result. A LC state of matter may not always exist in Liquid Crystal materials (just as water may be ice or water vapor).

History, Classification and Formation of Liquid Crystals
Classification of Liquid Crystals


a) On the bases of mode of formation

Lyotropic liquid crystals

The majority of solids can also be converted to liquids by being dissolved in another liquid. As with most melting, this transition from the solid to the dissolved state usually happens in a single step, but for some compounds, it happens in multiple steps. The dissolving liquid can more easily pass through the layers of connected molecules formed by these substances than it can through the layers' individual molecules. The solid's ordered structure partially collapses when the layers become separated from one another in this fashion, creating a hazy fluid known as a lyotropic liquid crystal. Lyotropic LCs show phase transitions that depend on solvent molecule concentration and temperature (typically water).

Thermotropic liquid crystals

These are created by heating solids. When the temperature changes, thermotropic LCs show a phase transition into the LC phase. A polarised light beam can spin its axis as it passes through some liquid crystals. This feature is lost in the presence of a weak electric field.

b) On the basis of arrangement of particles

Between the crystalline (solid) and isotropic (liquid) states of matter, there is a separate phase known as the liquid crystal state. Depending on the level of order present in the material, there are numerous different types of liquid crystal states.

Nematic LC

In the Nematic liquid crystal phase, molecules tend to point in the same direction despite having no positional order. Particles moves randomly in liquid crystal as shown in figure.

Smectic LC

The Greek word for soap is where the word "smectic" comes from. The thick, slick material that is frequently discovered in the bottom of a soap dish is actually a sort of smectic liquid crystal, which clarifies the origin of this seemingly equivocal substance. Another different mesophase of liquid crystal solids is the smectic state. In contrast to the Nematic, molecules in this phase exhibit a degree of translational order. The molecules in the smectic state continue to organize themselves in layers or planes while maintaining the general orientational order of nematics. Separate planes are seen to flow past one another, and motion is limited to inside these planes. The smectic state is more "solid-like" than the nematic because of the enhanced order.

One layer of particles slides other layer or layer exchange simply (see fig below), they show properties that are in between liquids and solids.

Cholestic LC

A form of chiral liquid crystal having a helical structure is called a cholesteric liquid crystal. Chiral nematic liquid crystals are another name for cholesteric liquid crystals. While the molecules in cholesteric liquid crystals are twisted and chiral in arrangement, they organize in layers with no positional ordering within layers and a director axis that varies with layers.

Because colour will reflect when the pitch, or the separation between layers with the same orientation, is about equal to the wavelength of the colour, cholesteric liquid crystals are coloured. When we press, heat, or cool cholesteric liquid crystals, we observe colour variations due to this shift in pitch.

No movement of particles occurs, they only vibrate at their own positions (see fig, below) and their properties are more closely related to solids.

 

History, Classification and Formation of Liquid Crystals
Nematic, Sematic and Cholestic LC






Liquid crystals Formation

Compounds having long, thin molecules that have specific atom groupings give rise to liquid crystals. These groups give the molecules their stiff, rod-like shape, which makes them strongly attract one another when they are arranged against each other.

Properties of liquid crystals

A kind of substance called liquid crystal (LC) has properties that fall somewhere between those of solid crystals and those of regular liquids. A liquid crystal, for instance, may flow like a liquid while having molecules that resemble crystals.

Solid like properties

Anisotropy

Optical activity

Particle arrangement

Liquid like properties

Surface tension

Viscosity

Fluidity

Uses

These substances are employed in liquid crystal displays (LCDs) found in many electrical items in thin layers. LCDs are frequently found in flat-screen televisions, computer monitors, cell phones, portable electronic games, digital camera viewfinders, and clocks and calculators.

Both natural and manmade applications serve as good examples of LCs. In living systems, lyotropic LCs are abundant; the tobacco mosaic virus, as well as numerous proteins and cell membranes, are LCs. In the domain of minerals, LCs include clays, soap solutions, and numerous related detergents. Liquid crystals are widely used in liquid crystal displays.


Thursday, January 26, 2023

What Are Liquids & Forces Inside Liquids

 What Are Liquids & Forces Inside Liquids

What Are Liquids & Forces Inside Liquids

What are Liquids

The term "liquid" can be used to describe both a substance's kind and its physical state. For instance, water is the most prevalent liquid on Earth.

A form of matter known as a liquid has unique characteristics that make it less stiff than a solid but more rigid than a gas. Unlike a solid, which has a defined shape, a liquid can flow. In contrast, a liquid takes on the shape of the container it is kept in. A liquid does not expand to fill the container like a gas does, despite the fact that this is comparable to a gas. Water, oil, alcohol, and mercury are a few examples of liquids that can be found at room temperature, which is roughly 20 degrees Celsius or 68 degrees Fahrenheit. Liquids can differ greatly from one another. For instance, olive oil pours more slowly than vinegar because it is heavier and thicker and hence weights more.

Physical properties of liquids
Cohesion

The intermolecular forces that hold molecules together cause the molecular components of a liquid to attract one another to varying degrees. Surface tension, which is what keeps water in droplets together or allows a pin to float on the surface, is a sign of cohesion.

Adhesion

 Depending on the type of liquid and the other component, there can be variable degrees of attractive forces between them. This explains why water adheres to surfaces differently depending on their composition, such as glass versus plastic. Adhesion also explains capillary action, which is when liquid tends to rise slender tubes or other porous materials, such as when a nurse uses a small glass tube to draw blood from a patient.

Volume

Despite taking on the shape of its container, liquid retains a largely constant volume. Unless vaporization or evaporation is affecting the volume, a modest change in pressure or temperature may only slightly modify the volume.

Compressibility

 Liquids are held together by strong intermolecular forces in a manner similar to that of solids, resulting in a relatively incompressible substance—another characteristic that distinguishes liquids from gases.

Variability

A liquid doesn't have a set form. It behaves similarly to gas in that it molds itself to the shape of the container it is held in, but unlike gas, it does not expand to fill the container.

Flowability

One of a liquid's fundamental properties is its capacity to flow. Its viscosity, which changes according on molecular size and intermolecular interactions, determines how much it flows, though. Because of its greater molecular structure, motor oil, for instance, has a far higher viscosity than water. As a result, motor oil moves much more slowly than water.

Evaporation

A liquid's molecular components frequently clash with one another or the container because of how much movement they undergo. These collisions result in the transfer of energy between molecules. Intermolecular forces are mainly in charge of the physical properties of the substance. Surface tension can be broken when enough energy is delivered to the liquid's surface, leading to the liquid evaporating. 







Forces inside liquids

Most important forces are intermolecular forces. The compacted states of matter are caused by intermolecular forces. Intermolecular forces, which hold the particles that make up solids and liquids together, have an impact on a number of the physical characteristics of matter in these two forms.

Intermolecular Forces

A force that attracts the protons or positive parts of one molecule to the electrons or negative parts of another molecule is known as an intermolecular force. A substance's various physical and chemical properties are influenced by this force. The strength of an object's intermolecular forces determines its boiling point; the higher the intermolecular forces, the higher the boiling point. We can compare the intermolecular forces between different substances by comparing their boiling points. This is so that these intermolecular forces can be broken and the liquid can be transformed into vapour using the heat that the substance absorbs at its boiling point.

Between molecules that have hydrogen bound to a strongly electronegative atom, such as O, N, or F, hydrogen bonds are very potent dipole-dipole interactions. Van der Waals forces and hydrogen bonds are examples of electrostatic intermolecular forces. Intermolecular interactions, which hold molecules to one another in liquids and hold polyatomic ions together, are weaker than intramolecular interactions, which hold the atoms within molecules together. Intermolecular contacts alter to cause transitions from the solid to liquid or from the liquid to gas phases, but intramolecular interactions are unaffected. Dipole-dipole interactions, London dispersion forces (commonly referred to as van der Waals forces), and hydrogen bonds are the three main types of intermolecular interactions.

Factors affecting intermolecular forces

The following interactions affect intermolecular forces:

a) Dipole-Dipole Forces

Polar molecules are attracted to one another through dipole-dipole interactions. Due to variations in the electronegativity of the atoms involved in a covalent connection, polar molecules contain permanent dipoles. One molecule's partially positive portion will gravitate toward another molecule's partially negative component. Simply we say that these forces are present between polar molecules.

Example: In HCl molecules, dipole-dipole interactions take place. Chlorine obtains a partial negative charge because it is relative more electronegative than hydrogen (whereas hydrogen acquires a partial positive charge). The HCl molecules then engage in a dipole-dipole interaction.

 b) Dipole Induced Dipole Forces or Debye Forces

Ion-induced dipole interactions are comparable to these interactions. The key distinction is that non-polar molecules are converted into induced dipoles by the proximity of polar molecules. Present between polar or permanent dipole and non-polar molecules, for example mixture of Ne and HCL

c) London Dispersion Forces or Instantaneous Dipole-Induced Dipole Forces

Discovered by German Physicist Fritz London in 1930. It has a limited range of operation and is the weakest force. The flow of electrons causes this type of force, which produces transient positive and negative charged areas. These forces present between non polar molecules.

d) Interactions between Ion-Dipoles

With the exception of the fact that they happen between ions and polar molecules, these interactions are comparable to dipole-dipole interactions. For example: The polar H2O molecules are drawn to the sodium and chloride ions in the beaker when NaCl and water are combined there. The size of the dipole moment affects how strong this interaction is, size and charge of an ion; the size of the polar molecule

e) Dipole Interactions Induced by Ions

In this kind of interaction, an ion that is put close to a non-polar molecule causes it to become polarised. Once charged, the non-polar molecules exhibit induced dipole behaviour. Ion-induced dipole interaction is the name given to this interaction between an ion and an induced dipole.

f) Hydrogen Bonding

Intermolecular forces tend to be exceptionally strong in molecules having hydrogen atoms bound to electronegative atoms like O, N, and F (and to a much lesser extent Cl and S). These lead to boiling temperatures that are significantly higher than those found for compounds where London dispersion forces predominate. With regard to the covalent hydrides of elements in groups 14–17. Group 14 contains the heavier constituents of methane as well as a sequence of boiling temperatures that rise gradually with molar mass. Nonpolar molecules, for which London dispersion forces are the only intermolecular forces, are predicted to follow this pattern (boiling point increases with molecular mass). As opposed to what their molar weights would suggest, the hydrides of the lightest members of groups 15–17 have boiling points that are almost higher than 100°C. 

What Are Liquids & Forces Inside Liquids

Intramolecular forces

Ionic bond

This bond is created when all of the valence electrons are completely transferred between the atoms. It is a kind of chemical connection that produces two ions with opposing charges. In ionic bonding, the nonmetal takes the lost electrons to form a negatively charged anion while the metal loses them to become a positively charged cation.

Covalent bond

Atoms that share a similar electronegativities—the affinity or desire for electrons—form a covalent connection. Both atoms share electrons in order to achieve octet configuration and become more stable because they have equivalent affinities for electrons and neither has a propensity to donate them.

When the electronegativity difference between the linked atoms is smaller than 0.5, a nonpolar covalent bond is created between the same atoms or atoms with extremely similar electronegativities.

When atoms with marginally differing electronegativities share electrons, a polar covalent link is created. Between 0.5 and 1.9 electronegativity are different between linked atoms.

HF, O-H in water, and hydrogen chloride are all example of polar covalent bonds.

Metallic bond

This kind of covalent bonding only happens between metal atoms, and it allows the valence electrons to freely travel around the crystal structure. This link is created by the attraction of the fixed positively charged metal ions and the moving electrons, often known as the "sea of electrons." Samples of pure elemental metals, like gold or aluminium, or alloys, like brass or bronze, include metallic bonds. Freely moving electrons oscillate and emit photons of light, which is what gives metals their reflecting quality. They also allow metals to efficiently conduct heat and energy.

What Are Liquids & Forces Inside Liquids









Difference between Intermolecular and Intramolecular forces


Difference between inter and intra-molecular forces